在PuTTY中为KILN设置SSH隧道

- 6
- 106 2019-02-01
情况:

面包师仅在带有终端的服务器上运行.我通过SSH认证的PuTTY连接管理服务器.我使用以下命令编译并运行KILN:

./backend -network mainnet

,应用程序正在运行,并显示以下输出:

所需结果:

我想在本地Firefox浏览器上管理KILN监视器:

http://127.0.0.1:8000/

问题:

为此,我必须如何配置PuTTY?以下配置选项卡正确吗?
Situation:

The baker is running on a server with terminal only. I manage the server through a SSH authenticated PuTTY connection. I compiled and run KILN with:

./backend -network mainnet

and the application is running with the following output:

Desired Result:

I want to manage the KILN monitor on my local Firefox browser:

http://127.0.0.1:8000/

Questions:

How do I have to configure PuTTY for this purpose? Is the following config tab the right one?
kiln baker

- 也不确定我是否正确理解了您的问题,但是仅在本地计算机的浏览器中使用运行Kiln的服务器的IP地址会更容易,更高效吗?例如:10.0.220.20:8000?
  
  Nor sure if I understand your question correctly, but wouldn't it be easier and more efficient to just use the IP-address of your server that runs Kiln in the browser of your local machine, for instance: 10.0.220.20:8000?
  - 0
  - 2019-02-10
  - cryptodad

1 个回答

投票数

- 3
- 2019-02-02
解决方案:

最初的问题是我在隧道配置中使用了外部IP.以下内容解决了参考PuTTY隧道的文档:

1)将本地计算机上的端口的"源端口"设置为8000.

2)将"目标"设置为远程计算机上的内部 IP地址,包括屏幕快照中突出显示的端口8000,然后按"添加".

3)确保随后保存配置.

Solution:

My initial problem was that I used the external IP in the tunnel configuration. The following solves the problem Reference to documentation on PuTTY tunnels:

1) Set "Source Port" for the port on your local machine: 8000.

2) Set "Destination" to your internal IP address on the remote machine including port 8000 as highlighted in the screenshot and press "add".

3) Make sure to save the configuration afterwards.